Download the software for your product below (if available) and follow the instructions provided in the installation technical note.
| Software | Date Released | Revision | Documentation | Description |
| PoChain | 3/18/2024 | 4/17/2024 | Pochain software installation instructions | V1.4.5 |
| DGraphPro | 3/18/2024 | 4/17/2024 | How to download and setup DGraphPro How to Enable/disable Admin Control (Win 11) How to Enable/disable Admin Control (Win 7-10) |
V7.7.3 |
FAQs
The software needed will be listed in the specs and software section of your datalogger.
Please refer to the documentations list on the table above. It will contain information regarding setup/download and whether there are any system requirements prior to downloading the software. If issues persist, please reach out by phone at +1 (971) 245-5485, use our online chat, or email us at info@stninstruments.com for help from a qualified specialist.
The PDF files in the software zip folders are embeded into the software, and as a result, may not open when individually clicked upon. They are help and info sections that are directly correlating to those sections in the software.
If the software was downloaded after the datalogger was plugged into your device, try ejecting the datalogger, closing the software, then replugging the datalogger into your system before running the software again. Sometimes the software cannot read a datalogger that's plugged in prior to the software was set up.
Yes. All our software is free to download.
If you have any questions, please feel free to contact us by phone at +1 (971) 245-5485, use our online chat, or email us at info@stninstruments.com. Thank you for your interest in STN Instruments.