Multi-Use Temperature & Humidity USB PDF Data Logger w/ Display & Ext Probe

External T+RH sensor, configurable, PDF auto-generation   

This multi-use temperature and humidity data logger’s accuracy is T: ±0.3°C, RH: ±2.5%rh (20%rh to 80%rh), ±3.5%rh (else) (optional T: ±0.2°C, RH: ±2.0%rh (20%rh to 80%rh), ±3.0%rh (else) covering its range, -40°C to 70°C and 0.1%rh to 99.9%rh with IP40 protection. It can be easily configured using the PoChain software (available for download on the website) and starts logging immediately or with a delay, depending on your preferred configuration. 

After the logging task is completed, connect the data logger to any computer with a USB port, and a PDF file will be generated automatically.   

Data analysis & Data Export   

Once connected to a computer with installed PoChain software, this data logger allows for efficient and comprehensive data analysis and exportation in various forms such as xls, csv, pdf, txt, and cin, to a designated location on the user's computer.   

Up to 6 marker points    

This data logger supports data marking up to 6 points. In the process of logging, the user can use the key to enter mark mode (MK), then press the key to mark the data.   

Re-calibratable assures long time use in tolerance    

Each unit is shipped with a calibration report to assure accuracy from an ISO/IEC 17025:2017 conforming calibration laboratory and indicate traceability of measurements to the SI units through  NIST. The temperature and humidity parameters can be recalibrated by PoChain software with up to 6 points calibration by any lab with calibration capability (not recommended to be done by user) or our lab as well.